Adjusting Cameras; Adjusting Sound - Polycom ViewStation FX User Manual

Chapter 1

Adjusting Cameras

Adjusting Sound

© Polycom, Inc.
To adjust the camera on your ViewStation FX or VS4000, press the
NEAR button on the remote control. Your camera view appears
full-screen on the television monitor. A camera icon appears in the
upper right corner pointing toward you. Use the arrow buttons on the
remote control to tilt the camera up and down and to pan from side
to side. Use the ZOOM button to zoom in and out.
You can adjust the camera on a far site ViewStation FX or VS4000
if that site has the Far Control or Near Camera option enabled. For
information on how to enable this option, refer to the Adjusting
Cameras section of Chapter 2, Using the ViewStation FX and
VS4000.
Press the FAR button on the remote control. The far site cameras
view appears full-screen on the television monitor. A camera icon
appears in the upper right corner pointing away from you. Use the
arrow buttons on the remote control to move the camera up and
down and side to side. Use the ZOOM buttons to zoom in and out.
You can view the near and far sites during a call by pressing the
NEAR button on the remote control from any menu screen.
The call volume on the ViewStation FX and the VS4000 is related to
the volume on the television monitor. For best results, set the
volume on the television monitor to one-half its maximum volume,
and set the ViewStation FX or VS4000 volume at a comfortable
level. To adjust the volume on the ViewStation FX or VS4000, press
the volume buttons on the remote control.
There is a separate volume control for the sound effects on the
ViewStation FX and the VS4000. To adjust this volume setting,
select System Info>Admin Setup>Phone/Audio.
43 ViewStation FX/VS 4000 User's Guide
Getting Started