Multi-Point Setup; Dialing Speeds; Call Preference; Numbers - Polycom ViewStation FX User Manual

Chapter 5
© Polycom, Inc.

Multi-Point Setup

The Multi-Point Setup screen allows you to choose a viewing mode
for multi-point calls.
Figure 5-6. Multi-Point Setup Screen
For information about multi-point viewing modes, see the Multi-point
Viewing Modes section of Chapter 2, Using the ViewStation FX and
the VS4000.

Dialing Speeds

Use the Dialing Speed screen to set the dialing speeds for each type
of call. The speeds you set in this screen are available for selection
when placing a call. You can set a limited number of speeds to
simplify dialing for your users.

Call Preference

Use this screen to set the types of call that can be dialed from the
ViewStation FX or VS4000. If you do not have the proper equipment
connected for the type of call you've chosen, you see a message
instructing you to power off the ViewStation FX or VS4000 and
connect the equipment.

Numbers

This screen is used to enter numbers that other sites will dial to call
your ViewStation FX or VS4000.
System Information and Diagnostics
141 ViewStation FX/VS 4000 User's Guide