Polycom ViewStation FX User Manual page 103

Chapter 3
© Polycom, Inc.
7. Select your presentation file and click on the pcPresent button.
A window appears indicating that your slides are being
converted to thumbnail sketches. Once this is complete, your
thumbnails are loaded into the flash memory of the ViewStation
FX or VS4000.
Note This feature enables the ViewStation FX or VS4000 to keep
the slides active if you lose connection during a video call or
presentation. The slides remain on the ViewStation FX or
VS4000 as long as they are active on the web browser.
Note You can load up to eight presentations on a ViewStation FX
or VS4000.
Complete the following steps on the ViewStation FX or VS4000 to
view the presentation:
1. Press the SLIDES button on the remote control. The Available
Presentations screen appears.
2. Select your presentation and press the
control. A password may be required to proceed.
3. A thumbnail of each slide appears on the screen so that you can
see all of the slides at once. Use the arrow buttons on the
Using the ViewStation FX or the VS4000 with a PC
Figure 3-7. Open Presentation
89 ViewStation FX/VS 4000 User's Guide
button on the remote