General Setup - Polycom ViewStation FX User Manual

Chapter 5

General Setup

© Polycom, Inc.
The General Setup screen displays basic information regarding your
ViewStation FX or VS4000 setup.
Figure 5-5. General Setup Screen
To change the setup, highlight the option field and change the
information. Press the MENU button on the remote control to save
your changes when you are finished. You can change the following
general setup options:
• Country—Enter the country where the ViewStation FX or
VS4000 is located.
• Language—Enter the language that you want to appear on the
ViewStation FX or VS4000 user interface.
• System Name—Enter a name for the ViewStation FX or
VS4000.
• Auto Answer—Enable this option to have the ViewStation FX
or VS4000 answer incoming calls automatically.
• Allow Dialing—Enable this option to allow users to place calls
from the ViewStation FX or VS4000. If this option is disabled, the
ViewStation FX or VS4000 only receive calls. You can still place
calls from the web interface.
System Information and Diagnostics
139 ViewStation FX/VS 4000 User's Guide