Camera Presets - Polycom ViewStation FX User Manual

Chapter 2
© Polycom, Inc.

Camera Presets

The following sections provide procedures on setting up the
ViewStation FX or VS4000 camera. The VS4000 does not currently
support this feature.
You can set and store up to ten preset camera positions. These ten
camera presets can be distributed across the far camera and up to
four near-site cameras.
Complete the following steps to set a preset:
1. Press the NEAR or FAR button to select the near or far camera.
2. If you pressed the NEAR button, press it again to select the
near-site camera.
3. Position the camera using the arrow buttons and ZOOM buttons
on the remote control.
4. Press the button. The camera preset circles are now
displayed. A "Press 0-9 to store a preset" message appears on
the main monitor.
Note 1 If the circle is transparent, the preset is empty.
Note 2 If the circle is solid yellow, the preset is assigned.
Note 3 To clear all the presets, press the pound (#) key on the
remote.
5. Press a number button on the remote control to assign that
button to the preset.
To select a camera preset, press the NEAR or FAR button for the
desired camera and press the number button on the remote control
for the preset you want.
Automatic Voice Tracking (ViewStation FX Only)
The main camera on your ViewStation FX can automatically move
to whomever is speaking in the meeting. The first time it moves to a
person, it might take several seconds of continuous speech to locate
the person speaking. It picks out the position quickly the next time
the person speaks.
Using the ViewStation FX and the VS4000
71 ViewStation FX/VS 4000 User's Guide