Monitor Setup - Polycom ViewStation FX User Manual

Chapter 5
© Polycom, Inc.
converters and is not suggested nor supported for use in live video
mode.
4CIF only works between video communications systems
supporting this standard. If the receiving system does not support
4CIF, then the transmitting system does not send 4CIF data.
Enable 4CIF on your FX or VS4000
Enable 4CIF on your FX or VS4000 system, as follows:
1. From the main calling screen, select System Info>Admin
Setup>Video/Camera>Cameras. The following screen is
displayed.
2. Select the camera(s) you want to use as high resolution. For
additional information on setting up additional cameras, see
Cameras in Chapter 1

Monitor Setup

Use the Monitor Setup screen to set monitor and viewing options.
Access the Monitor Setup screen through System Info>Admin
Setup>Video Camera>Monitors.
Figure 5-10. Monitor Setup screen
System Information and Diagnostics
147 ViewStation FX/VS 4000 User's Guide