Network Interface Module; About The Remote Control; Microphone Pod - Polycom ViewStation FX User Manual

Chapter 1

Network Interface Module

About the Remote Control

Microphone Pod

© Polycom, Inc.
• 2 triple RCA cables for connection to a VCR (yellow, white,
and red)
• 1 RCA cable for connection to an audio mixer (black)
• 1 double RCA cable
• RJ Cables bag
• 2 RJ-9 microphone cords (brown)
• 1 RJ-45 keyed cable for connection to the network interface
module (light blue)
• RJ-11 telephone cord (pink), where approved.
• 1 RJ-45 cable for connection to the LAN (orange)
• 1 RJ-45 cable for connection to a PC (blue)
The ViewStation FS or VS4000 may also include one of the following
network interface equipment(s) (As specified by the user):
– V.35 Network Interface:
• V.35 Module
– PRI Network Interface:
• PRI Module
•
Cables (1 RJ-45, 1 Power supply cable)
– Quad BRI Network Interface:
• Quad BRI Inverse Multiplexer (IMUX)
• 4 RJ-45 cables
• 1 RJ-45 cable with a keyed connector
The remote control is an integral part of the system. You can use a
remote control to configure and operate the ViewStation FX or
VS4000. Once you have the system set up and running, press the
yellow INFO button on the remote control for a basic description of
the remote control buttons.
The microphone pods provide digital audio input to the ViewStation
FX and the VS4000. Connect the 30-foot (9-meter) cable to the
ViewStation FX or VS4000 and one of the microphones pods.
3 ViewStation FX/VS 4000 User's Guide
Getting Started