Viewing Streams Using Apple Quicktime; Viewstation Fx Or Vs4000 Stream Configuration; Pc Configuration - Polycom ViewStation FX User Manual

Chapter 2

Viewing Streams Using Apple QuickTime

ViewStation FX/VS 4000 User's Guide
• Audio Port—16384 is the default audio port for your IP address.
You can change the port number.
• Video Port—49152 is the default video port for your IP address.
You can change the port number.
• Allow Streaming—Enable this icon to allow streaming from the
ViewStation FX or VS4000. If this option is disabled, you cannot
select a streaming call from the Main screen.

ViewStation FX or VS4000 Stream Configuration

1. To enable streaming on your ViewStation FX or VS4000:
a. Go to the Streaming setup page (System Info>Admin
Setup>LAN/H.323>Streaming).
b. Make sure that Enable Streaming Announcement is
enabled. It should be set by default.
c. Enable Allow Streaming.
2. To start sending a stream:
a. From the main page, select Call Type.
b. Select Streaming Call. Decide if you need a password.
c. Click Start. A Streaming icon is now displayed on the upper
left corner of your television screen.
You can start streaming before or after you place a video call. If you
are streaming a presentation, you can go ahead and start the
presentation immediately.

PC Configuration

1. Enable streaming on your ViewStation FX or VS4000 as
described in step 1 ViewStation FX or VS4000 Configuration.
2. Start streaming as described in step 2 of the ViewStation FX or
VS4000 Stream Configuration.
3. To view streaming using Apple QuickTime:
a. Open your web browser.
b. Enter the IP address of your ViewStation FX or VS4000 in
the browser address bar.
c. Click on the View a Meeting icon.
Using the ViewStation FX and the VS4000
60 www.polycom.com