Time; Sntp Client; Table 50: Time Commands - Edge-Core ES3510MA Management Manual

| System Management Commands
C 21
HAPTER

Time

T
IME

sntp client

SMTP Minimum Severity Level: 7
SMTP destination email addresses
-----------------------------------------------
ted@this-company.com
SMTP Source Email Address: bill@this-company.com
SMTP Status: Enabled
Console#
The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP). Maintaining an accurate time on the switch enables
the system log to record meaningful dates and times for event entries. If
the clock is not set, the switch will only record the time from the factory
default set at the last bootup.

Table 50: Time Commands

Command Function
SNTP Commands
sntp client Accepts time from specified time servers
sntp poll Sets the interval at which the client polls for time
sntp server Specifies one or more time servers
show sntp Shows current SNTP configuration settings
Manual Configuration Commands
clock timezone Sets the time zone for the switch's internal clock
calendar set Sets the system date and time
show calendar Displays the current date and time setting
This command enables SNTP client requests for time synchronization from
NTP or SNTP time servers specified with the
no form to disable SNTP client requests.
S
YNTAX
[no] sntp client
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
– 540 –
Mode
GC
GC
GC
NE, PE
GC
PE
NE, PE
sntp server command. Use the