Snmp-Server - Edge-Core ES3510MA Management Manual

| SNMP Commands
C 22
HAPTER

snmp-server

Table 53: SNMP Commands (Continued)
Command Function
Notification Log Commands
nlm Enables the specified notification log
snmp-server notify-filter Creates a notification log and specifies the target
host
show nlm oper-status Shows operation status of configured notification
logs
show snmp notify-filter Displays the configured notification logs
ATC Trap Commands
snmp-server enable port- Sends a trap when broadcast traffic falls beneath the
traps atc broadcast- lower threshold after a storm control response has
alarm-clear been triggered
snmp-server enable port- Sends a trap when broadcast traffic exceeds the upper
traps atc broadcast- threshold for automatic storm control
alarm-fire
snmp-server enable port- Sends a trap when broadcast traffic exceeds the upper
traps atc broadcast- threshold for automatic storm control and the apply
control-apply timer expires
snmp-server enable port- Sends a trap when broadcast traffic falls beneath the
traps atc broadcast- lower threshold after a storm control response has
control-release been triggered and the release timer expires
snmp-server enable port- Sends a trap when multicast traffic falls beneath the
traps atc multicast-alarm- lower threshold after a storm control response has
clear been triggered
snmp-server enable port- Sends a trap when multicast traffic exceeds the upper
traps atc multicast-alarm- threshold for automatic storm control
fire
snmp-server enable port- Sends a trap when multicast traffic exceeds the upper
traps atc multicast- threshold for automatic storm control and the apply
control-apply timer expires
snmp-server enable port- Sends a trap when multicast traffic falls beneath the
traps atc multicast- lower threshold after a storm control response has
control-release been triggered and the release timer expires
This command enables the SNMPv3 engine and services for all
management clients (i.e., versions 1, 2c, 3). Use the no form to disable the
server.
S
YNTAX
[no] snmp-server
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Global Configuration
– 556 –
Mode
GC
GC
PE
PE
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)