Showing System Files - Edge-Core ES3510MA Management Manual

| Basic Management Tasks
C 4
HAPTER
Managing System Files
S S
HOWING YSTEM
F
ILES
W I
EB NTERFACE
To set a file to use for system initialization:
Click System, then File.
1.
Select Set Start-Up from the Action list.
2.
Mark the operation code or configuration file to be used at startup
3.
Then click Apply.
4.
Figure 9: Setting Start-Up Files
To start using the new firmware or configuration settings, reboot the
system via the System > Reset menu.
Use the System > File (Show) page to show the files in the system
directory, or to delete a file.
Files designated for start-up, and the Factory_Default_Config.cfg
N :
OTE
file, cannot be deleted.
CLI R
EFERENCES
◆ "dir" on page 515
"delete" on page 515
◆
W I
EB NTERFACE
To show the system files:
Click System, then File.
1.
Select Show from the Action list.
2.
To delete a file, mark it in the File List and click Delete.
3.
– 98 –