Edge-Core ES3510MA Management Manual page 450

| Multicast Filtering
C 18
HAPTER
Layer 2 IGMP (Snooping and Query)
C U
OMMAND SAGE
◆ Static multicast addresses are never aged out.
When a multicast address is assigned to an interface in a specific VLAN,
◆
the corresponding traffic can only be forwarded to ports within that
VLAN.
P
ARAMETERS
These parameters are displayed:
◆ VLAN – Specifies the VLAN which is to propagate the multicast service.
(Range: 1-4093)
Interface – Activates the Port or Trunk scroll down list.
◆
Port or Trunk – Specifies the interface assigned to a multicast group.
◆
Multicast IP – The IP address for a specific multicast service.
◆
W I
EB NTERFACE
To statically assign an interface to a multicast service:
Click Multicast, IGMP Snooping, IGMP Member.
1.
Select Add Static Member from the Action list.
2.
Select the VLAN that will propagate the multicast service, specify the
3.
interface attached to a multicast service (through an IGMP-enabled
switch or multicast router), and enter the multicast IP address.
Click Apply.
4.
Figure 273: Assigning an Interface to a Multicast Service
To show the static interfaces assigned to a multicast service:
Click Multicast, IGMP Snooping, IGMP Member.
1.
Select Show Static Member from the Action list.
2.
Select the VLAN for which to display this information.
3.
– 450 –