Banner Configure Manager-Info; Banner Configure Mux - Edge-Core ES3510MA Management Manual

This command is used to configure the manager contact information
banner configure
displayed in the banner. Use the no form to restore the default setting.
manager-info
S
YNTAX
D
EFAULT
None
C
OMMAND
Global Configuration
C
OMMAND
Input strings cannot contain spaces. The banner configure manager-
info command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
E
XAMPLE
This command is used to configure the mux information displayed in the
banner configure
banner. Use the no form to restore the default setting.
mux
S
YNTAX

banner configure manager-info

name mgr1-name phone-number mgr1-number
[name2 mgr2-name phone-number mgr2-number |
name3 mgr3-name phone-number mgr3-number]
no banner configure manager-info [name1 | name2 | name3]
mgr1-name - The name of the first manager.
mgr1-number - The phone number of the first manager.
mgr2-name - The name of the second manager.
mgr2-number - The phone number of the second manager.
mgr3-name - The name of the third manager.
mgr3-number - The phone number of the third manager.
Maximum length of each parameter: 32 characters
S
ETTING
M
ODE
U
SAGE
Console(config)#banner configure manager-info name Albert_Einstein phone-
number 123-555-1212 name2 Lamar phone-number 123-555-1219
Console(config)#
banner configure mux muxinfo
no banner configure mux
muxinfo - The circuit and PVC to which the switch is connected.
(Maximum length: 32 characters)
– 501 –
| System Management Commands
C 21
HAPTER
Banner Information