Spanning-Tree Spanning-Disabled; Spanning-Tree Loopback-Detection Release - Edge-Core ES3510MA Management Manual

spanning-tree
spanning-disabled
spanning-tree
loopback-detection
release
E
XAMPLE
Console(config)#interface ethernet ethernet 1/5
Console(config-if)#spanning-tree edge-port
Console(config-if)#spanning-tree root-guard
Console(config-if)#
This command disables the spanning tree algorithm for the specified
interface. Use the no form to re-enable the spanning tree algorithm for the
specified interface.
S
YNTAX
[no] spanning-tree spanning-disabled
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
E
XAMPLE
This example disables the spanning tree algorithm for port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#
This command manually releases a port placed in discarding state by
loopback-detection.
S
YNTAX
spanning-tree loopback-detection release interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Use this command to release an interface from discarding state if loopback
detection release mode is set to "manual" by the
detection release-mode
– 777 –
C 33
HAPTER
command and BPDU loopback occurs.
| Spanning Tree Commands
spanning-tree loopback-