Logging Sendmail Level; Logging Sendmail Destination-Email - Edge-Core ES3510MA Management Manual

| System Management Commands
C 21
HAPTER
SMTP Alerts
logging sendmail
level
logging sendmail
destination-email
E
XAMPLE
Console(config)#logging sendmail host 192.168.1.19
Console(config)#
This command sets the severity threshold used to trigger alert messages.
Use the no form to restore the default setting.
S
YNTAX
logging sendmail level level
no logging sendmail level
level - One of the system message levels
sent include the selected level down to level 0. (Range: 0-7;
Default: 7)
D S
EFAULT ETTING
Level 7
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The specified level indicates an event threshold. All events at this level or
higher will be sent to the configured email recipients. (For example, using
Level 7 will report all events from level 7 to level 0.)
E
XAMPLE
This example will send email alerts for system errors from level 3 through
0.
Console(config)#logging sendmail level 3
Console(config)#
This command specifies the email recipients of alert messages. Use the no
form to remove a recipient.
S
YNTAX
[no] logging sendmail destination-email email-address
email-address - The source email address used in alert messages.
(Range: 1-41 characters)
D S
EFAULT ETTING
None
– 538 –
(page 531). Messages