P
ARAMETERS
These parameters are displayed:
Port – Port identifier.
◆
Type – Indicates the port type. (100Base-TX, 1000Base-T,
◆
100Base SFP or 1000Base SFP)
Name – Interface label.
◆
Admin – Shows if the port is enabled or disabled.
◆
Oper Status – Indicates if the link is Up or Down.
◆
Media Type – Media type used.
◆
(Options: RJ-45 – Copper-Forced;
SFP – Copper-Forced, SFP-Forced, or SFP-Preferred-Auto;
Default: RJ-45 – Copper-Forced; SFP – SFP-Preferred-Auto)
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
◆
Oper Speed Duplex – Shows the current speed and duplex mode.
◆
Oper Flow Control – Shows if flow control is enabled or disabled.
◆
W
I
EB
NTERFACE
To display port connection parameters:
Click Interface, Port, General.
1.
Select Show Information from the Action List.
2.
Figure 26: Displaying Port Information
– 121 –
| Interface Configuration
C
5
HAPTER
Port Configuration