Auto-Traffic-Control Auto-Control-Release; Snmp-Server Enable Port-Traps Atc Broadcast-Alarm-Clear - Edge-Core ES3510MA Management Manual

auto-traffic-control
auto-control-release
snmp-server enable
port-traps atc
broadcast-alarm-
clear
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
This command can be used to manually stop a control response any time
after the specified action has been triggered.
E
XAMPLE
Console#auto-traffic-control broadcast control-release interface ethernet 1/1
Console#
This command automatically releases a control response after the time
specified in the auto-traffic-control release-timer
S
YNTAX
auto-traffic-control {broadcast | multicast}
auto-control-release
broadcast - Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
This command can be used to automatically stop a control response after
the specified action has been triggered and the release timer has expired.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast auto-control-release
Console(config-if)#
This command sends a trap when broadcast traffic falls beneath the lower
threshold after a storm control response has been triggered. Use the no
form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc broadcast-alarm-clear
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
– 747 –
| Automatic Traffic Control Commands
C 31
HAPTER
command has expired.