Ipv6 Dhcp Restart Client Vlan - Edge-Core ES3510MA Management Manual

C
OMMAND
◆
◆
◆
E
XAMPLE
In the following example, the device is reassigned the same address.
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart client
Console#show ip interface
Vlan 1 is Administrative Up - Link Up
Console#
R
ELATED
ip address (918)
This command submits a DHCPv6 client request.
ipv6 dhcp restart
client vlan
S
YNTAX
D
EFAULT
None
C
OMMAND
Privileged Exec
C
OMMAND
◆
U
SAGE
This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode through the
address command.
DHCP requires the server to reassign the client's last address if
available.
If the BOOTP or DHCP server has been moved to a different domain,
the network portion of the address provided to the client will be based
on this new domain.
Address is 12-34-12-34-12-34 (bia 12-34-12-34-12-34)
Index: 1001, MTU: 1500, Bandwidth: 1g
Address Mode is DHCP
IP Address: 192.168.0.9 Mask: 255.255.255.0
Proxy ARP is disabled
C
OMMANDS
ipv6 dhcp restart client vlan vlan-id
vlan-id - VLAN ID, specified as a single number, a range of
consecutive numbers separated by a hyphen, or multiple numbers
separated by commas. (Range: 1-4093, no leading zeroes)
S
ETTING
M
ODE
U
SAGE
This command starts the DHCPv6 client process if it is not yet running
by submitting requests for address prefix delegation through the
specified interface(s).
– 913 –
| DHCP Commands
C 40
HAPTER
DHCP Client
ip