Ip Igmp Profile; Permit, Deny - Edge-Core ES3510MA Management Manual

| Multicast Filtering Commands
C 37
HAPTER
IGMP Filtering and Throttling

ip igmp profile

permit, deny

This command creates an IGMP filter profile number and enters IGMP
profile configuration mode. Use the no form to delete a profile number.
S
YNTAX
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number.
(Range: 1-4294967295)
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
A profile defines the multicast groups that a subscriber is permitted or
denied to join. The same profile can be applied to many interfaces, but only
one profile can be assigned to one interface. Each profile has only one
access mode; either permit or deny.
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#
This command sets the access mode for an IGMP filter profile. Use the no
form to delete a profile number.
S
YNTAX
{permit | deny}
D S
EFAULT ETTING
Deny
C M
OMMAND ODE
IGMP Profile Configuration
C U
OMMAND SAGE
Each profile has only one access mode; either permit or deny.
◆
When the access mode is set to permit, IGMP join reports are
◆
processed when a multicast group falls within the controlled range.
When the access mode is set to deny, IGMP join reports are only
processed when a multicast group is not in the controlled range.
– 870 –