| Quality of Service
C
12
HAPTER
Creating QoS Policies
Committed Burst Size (BC) – Burst in bytes.
■
(Range: 4000-16000000 at a granularity of 4k bytes)
The burst size cannot exceed 16 Mbytes.
Peak Burst Size (BP) – Burst size in bytes. (Range: 4000-
■
16000000 at a granularity of 4k bytes)
The burst size cannot exceed 16 Mbytes.
Conform – Specifies that traffic conforming to the maximum
■
rate (CIR) will be transmitted without any change to the DSCP
service level.
Transmit – Transmits in-conformance traffic without any
■
change to the DSCP service level.
Exceed – Specifies whether traffic that exceeds the maximum
■
rate (CIR) but is within the peak information rate (PIR) will be
dropped or the DSCP service level will be reduced.
Set IP DSCP – Decreases DSCP priority for out of
■
conformance traffic. (Range: 0-63).
Drop – Drops out of conformance traffic.
■
Violate – Specifies whether the traffic that exceeds the peak
■
information rate (PIR) will be dropped or the DSCP service level
will be reduced.
Set IP DSCP – Decreases DSCP priority for out of
■
conformance traffic. (Range: 0-63).
Drop – Drops out of conformance traffic.
■
– 246 –