| Basic Administration Protocols
C
15
HAPTER
Link Layer Discovery Protocol
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
System Name – A string that indicates the system's administratively
◆
assigned name (see
System Description – A textual description of the network entity. This
◆
field is also displayed by the show system command.
◆
System Capabilities Supported – The capabilities that define the
primary function(s) of the system.
Table 24: System Capabilities
ID Basis
Other
Repeater
Bridge
WLAN Access Point
Router
Telephone
DOCSIS cable device
End Station Only
◆
System Capabilities Enabled – The primary function(s) of the
system which are currently enabled. Refer to the preceding table.
Management Address – The management address associated with the local
◆
system.
Interface Settings
The attributes listed below apply to both port and trunk interface types.
When a trunk is listed, the descriptions apply to the first port of the trunk.
Port/Trunk Description – A string that indicates the port or trunk
◆
description. If RFC 2863 is implemented, the ifDescr object should be
used for this field.
◆
Port/Trunk ID – A string that contains the specific identifier for the
port or trunk from which this LLDPDU was transmitted.
W
I
EB
NTERFACE
To display LLDP information for the local device:
Click Administration, LLDP.
1.
Select Show Local Device Information from the Step list.
2.
Select General, Port, or Trunk.
3.
– 362 –
"Displaying System Information" on page
Reference
—
IETF RFC 2108
IETF RFC 2674
IEEE 802.11 MIB
IETF RFC 1812
IETF RFC 2011
IETF RFC 2669 and IETF RFC 2670
IETF RFC 2011
89).