Switchport Forbidden Vlan; Switchport Gvrp - Edge-Core ES3510MA Management Manual

| VLAN Commands
C 34
HAPTER
GVRP and Bridge Extension Commands
switchport
forbidden vlan

switchport gvrp

This command configures forbidden VLANs. Use the no form to remove the
list of forbidden VLANs.
S
YNTAX
switchport forbidden vlan {add vlan-list | remove vlan-list}
no switchport forbidden vlan
add vlan-list - List of VLAN identifiers to add.
remove vlan-list - List of VLAN identifiers to remove.
vlan-list - Separate nonconsecutive VLAN identifiers with a comma
and no spaces; use a hyphen to designate a range of IDs. Do not
enter leading zeros. (Range: 1-4093).
D S
EFAULT ETTING
No VLANs are included in the forbidden list.
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
This command prevents a VLAN from being automatically added to the
◆
specified interface via GVRP.
If a VLAN has been added to the set of allowed VLANs for an interface,
◆
then you cannot add it to the set of forbidden VLANs for that same
interface.
E
XAMPLE
The following example shows how to prevent port 1 from being added to
VLAN 3:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport forbidden vlan add 3
Console(config-if)#
This command enables GVRP for a port. Use the no form to disable it.
S
YNTAX
[no] switchport gvrp
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
– 784 –