Yamaha WaveRunner GP1300R Service Manual page 538

HULL
HOOD
b
d
a
b
EXHAUST SYSTEM
d
c
Exhaust component parts assembly
1. Install:
• Exhaust outlet
• Rubber hose
• Water tank
NOTE:
• Insert the exhaust outlet 45–50 mm (1.77–
1.97 in) a into the rubber hose.
• Make sure that there is a distance of 10 mm
(0.39 in) b between the parting lines of the
exhaust outlet and the rubber hose.
• Insert the water tank 45–50 mm (1.77–1.97
in) c into the rubber hose.
• Make sure that there is a distance of 45 mm
(1.77 in) d between the parting lines of the
water tank and rubber hose.
2. Install:
• Rubber hose
NOTE:
• Install the rubber hose 45–50 mm (1.77–1.97
in) a into the water lock.
• Make sure that there is a distance of 10 mm
(0.39 in) b between the parting lines of the
water lock and the rubber hose.
• Install the rubber hose 45–50 mm (1.77–1.97
in) c into the water tank.
• Make sure that there is a distance of 30 mm
(1.18 in) d between the parting lines of the
water tank and rubber hose.
8-37
E