Fuel Hose Installation (Replacing With New Fuel Hose) - Yamaha WaveRunner GP1300R Service Manual

FUEL
2
2
FUEL INJECTION SYSTEM
b
a
1
a
A-A
1
A
A
2
Fuel hose installation (replacing with new
fuel hose)
1. Install:
• Quick connector 1
NOTE:
To install the fuel hose, be sure to align the lot
mark a on the fuel hose and the checker tab
2 on the quick connector with the crimped
section b of the clamp.
2. Install:
• Fuel hose 1
NOTE:
• Install the checker tab 2 of the fuel hose in
the position shown in the illustration in rela-
tion to the throttle bodies.
• Install the clamp with the crimped section at
the angle shown in the illustration.
• When replacing the fuel hose with a new
one, a checker tab 2 that has half engage-
ment prevention is attached to the quick con-
nector of the hose. If the quick connector is
completely installed to the fuel pipe, it is
removable.
4-21
E