Yamaha WaveRunner GP1300R Service Manual page 112

INSP
ADJ
ELECTRICAL
1. Remove:
• Battery bands
• Negative battery lead 1
• Positive battery lead 2
• Battery
• Battery breather hose 3
WARNING
• When removing the battery, disconnect
the negative lead first.
• Remove the battery to prevent acid loss
before turning the watercraft on its side to
service the impeller, etc.
2. Check:
• Electrolyte level
Low → Add distilled water.
The electrolyte level should be between
the maximum a and minimum b level
marks.
Filling steps:
• Remove the filler caps.
• Add distilled water to the maximum level
mark.
• Allow the battery to stand for 20 minutes.
If the electrolyte level drops, add more
distilled water until the level reaches the
maximum level mark.
CAUTION:
Use only distilled water. Other types of
water contain minerals which are harmful
to batteries.
3-13
E