Yamaha WaveRunner GP1300R Service Manual page 468

HULL
HOOD
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name
HANDLEBAR REMOVAL
QSTS cable (to jet thrust nozzle)
1 Grommet
2 Handlebar switch coupler
3 QSTS cable 2
4 QSTS cable 1
HANDLEBAR
Q'ty
Follow the left "Step" for removal.
Refer to "REMOTE CONTROL CABLES
AND SPEED SENSOR LEAD."
NOTE:
1
To ease installation, apply soapy water to
the grommet.
2
Cable 2 is identifiable by the white tape a
1
wrapped around it.
NOTE:
1
Route the QSTS cables behind the oil filler
hose.
8-2
Service points
E