Javad TRIUMPH-1 Operator's Manual page 93

5. Open the required firmware folder. Select the main.ldp file (Figure 5-17):
6. Click the Firmware Update button to load new firmware.
7. Clear the receiver's NVRAM (see "Clearing the NVRAM" on page 87) and update the
almanac ("Collecting Almanacs and Ephemerides" on page 41) after loading new
firmware.
8. Click File Disconnect, then File Exit to quit TriVU.
www.javad.com
Figure 5-17. Load New Firmware
Receiver and File Maintenance
Loading New Firmware
Sleep Mode
93