Javad TRIUMPH-1 Operator's Manual page 119

6. In the Service tab in the Main subtab set the mode to OFF. Click Apply (Figure 6-46).
7. In the NTRIP subtab set the NTRIP client parameters, then click Apply:
• IP Address
• Port
• User
• Password
Note:
As usually this information is given by NTRIP Caster (Figure 6-47).
www.javad.com
Figure 6-46. Service tab. Main subtab
Figure 6-47. Settings for NTRIP client
Configuration Examples
NTRIP Client Configuration
Rover Configuration
119