Javad TRIUMPH-1 Operator's Manual page 130

Configuration Examples
RCV-RAW Client Configuration Example
Rover Configuration
6. In the Service tab in the Main subtab set the mode to OFF. Click Apply (Figure 6-46).
7. In the RCV subtab set the RCV client parameters:
• IP Address
• Port
Note:
As usually this information is given by reference stations' network.
Set the RAW to ON, then click Apply (Figure 6-47)
Figure 6-65. Settings for RCV client for connect to The Orange Country Real Time Network (OCRTN)
130
Figure 6-64. Service tab. Main subtab
www.javad.com