Javad TRIUMPH-1 Operator's Manual page 60

Configuration
Configuring the Receiver
Configuring the External UHF Modem
Figure 3-15. Configure Receiver Positioning – MinPad for data recording
6. Click the Positioning tab and set the Elevation mask to 15 (Figure 3-16), then click Apply.
Figure 3-16. Configure Receiver Positioning – Elevation Mask
7. For the Base receiver, click the Base tab and set the following parameters (Figure 3-17 on
page 61), then click Apply.
• GPS/GLO at one time – enable
60
www.javad.com