Chapter 2. Pre-Survey Preparation; Installing Javad Gnss Software - Javad TRIUMPH-1 Operator's Manual

P -
RE SURVEY
Before beginning to survey with the TRIUMPH-1 receiver, the following software needs to be
installed and configurations need to be applied:
• Install receiver configuration software. See "Installing JAVAD GNSS Software" on page
27.
• Optional: install SIM card. See "Installing the Optional SIM Card" on page 29.
• Charge the batteries. See "Charging the Batteries" on page 31.
• Enable power source settings. See "Power Management" on page 33 and "Powering the
Receiver" on page 36.
• Configure the Bluetooth® wireless technology module. See "Bluetooth® Module
Configuration" on page 40.
• Collect almanacs and ephemerides. See "Collecting Almanacs and Ephemerides" on page
41.

2.1. Installing JAVAD GNSS Software

Use the following software programs for configuring and maintaining the receiver:
• TriVU
• ModemVU
This software is available on the JAVAD GNSS website. If downloading the program(s) from the
website, extract the program's files into a folder on your hard drive. The following sections
describe installing this software, and other sections throughout the manual describe using this
software with the receiver.
www.javad.com
P
REPARATION
Chapter 2
27