Remote Operation; Remote Run/Stop - Mitsubishi Electric MOTION CONTROLLERS Q172DCPU Programming Manual

4 AUXILIARY AND APPLIED FUNCTIONS

4.12 Remote operation

4.12.1 Remote RUN/STOP

This function is used to control the following operation of Motion CPU using
MT Developer.
• Remote RUN/STOP
• Remote latch clear
POINT
Latch clear can be executed only using the remote control of MT Developer.
The PLC ready flag (M2000) is turned ON/OFF by MT Developer with RUN/STOP
switch of Motion CPU module set to RUN.
(1) Operation procedure
(a) Remote RUN
Select [RUN] on "CPU remote operation" screen displayed by menu [Online]
– [Remote Operation], and click [Execute] button.
(b) Remote STOP
Select [STOP] on "CPU remote operation" screen displayed by menu
[Online] – [Remote Operation], and click [Execute] button.
4 - 41