Download  Print this page

Servo Parameter Reading Function - Mitsubishi Electric MOTION CONTROLLERS Q172DCPU Programming Manual

Melsec q series motion controller.
Hide thumbs

Advertisement

4 AUXILIARY AND APPLIED FUNCTIONS

4.9 Servo Parameter Reading Function

(1) When the servo parameters are changed, the Motion CPU will be automatically
read the servo parameters and reflected them to the servo parameter storage
area in the Motion CPU. Therefore, an operation to read servo parameters is
unnecessary in the following cases.
(a) The parameters are changed by auto tuning.
(b) The parameters are changed by connecting directly MR Configurator to the
servo amplifier.
POINT
If the power supply of Multiple CPU system is turned off/reset or the power supply
of servo amplifier is turned off immediately after change, it may not be reflected.
(2) After executing the servo parameter reading function, when it needs to reflect the
servo parameters changed to the MT Developer, read the servo parameters from
the Motion CPU and save data.
4 - 34

Advertisement

Table of Contents

   Also See for Mitsubishi Electric MOTION CONTROLLERS Q172DCPU

   Related Manuals for Mitsubishi Electric MOTION CONTROLLERS Q172DCPU

   Related Content for Mitsubishi Electric MOTION CONTROLLERS Q172DCPU

This manual is also suitable for:

Q173dcpu

Comments to this Manuals

Symbols: 0
Latest comments:
  • p Dec 14, 2015 07:47:
    This video describes how to eliminate the 'InS' message on a Mitsubishi Q Series motion controller by ...
  • p Dec 14, 2015 07:32:
    This video describes how to eliminate the 'InS' message on a Mitsubishi Q Series motion controller by