Mitsubishi Electric MOTION CONTROLLERS Q172DCPU Programming Manual page 78

Melsec q series motion controller
Hide thumbs Also See for MOTION CONTROLLERS Q172DCPU:
Table of Contents

Advertisement

3 COMMON PARAMETERS
POINT
GOT is recognized as an intelligent function modules "16 points 10 slots" on the
base (number of extension bases and slot No. are set in the GOT parameter.) for
bus connection with GOT.
Set the one extension base (16 points 10 slots) for connection with GOT, then set
"10 slots" as number of extension bases for connection with GOT in the system
setting (base setting).
<Example>
When the "2nd stage" of extension base is set as connection with GOT.
(Set "10" slot as "2nd stage" of extension base in the base setting.)
3 - 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q173dcpu

Table of Contents