Mitsubishi Electric MOTION CONTROLLERS Q172DCPU Programming Manual page 109

4 AUXILIARY AND APPLIED FUNCTIONS
<Operating procedure for ROM writing> Write the data of MT Developer to the ROM.
Main Frame screen
Write to CPU screen
The operating procedure for ROM writing using the MT Developer is shown below.
Operating procedure
1) Select menu "Online" -"Write to CPU" to
display "Write to CPU" screen.
2) Check data of MT Developer written in the
Motion CPU.
3) Select "Program memory + CPU ROM" in
target memory.
4) Select "Execute" button.
SRAM data built in Motion CPU module is written
to ROM after writing data of MT developer to
SRAM built-in Motion CPU module.
(Note): Mechanical system program and cam data
POINT
Be sure to write the all data beforehand to SRAM built-in
Motion CPU module at the ROM writing.
4 - 18
(converted data) cannot be displayed when
using OS type "SW8DNC-SV13".