Mitsubishi Electric MOTION CONTROLLERS Q172DCPU Programming Manual page 122

4 AUXILIARY AND APPLIED FUNCTIONS
<Example 1>
Personal
computer
QnUD(H)
CPU
QnUD(H)
CPU
QnUD(H)
CPU
(4) Network configuration which MELSECNET/10(H), Ethernet, CC-
Link, RS-422/485 were mixed
(a) When the MELSECNET/10(H) or Ethernet is defined as "Network" and CC-
Link or RS-422/485 is defined as "Link", combination of whether to be able
to access from the programming software packages (GX Developer,
MT Developer, etc.) is shown below.
Programming software package
Programming software package
Programming software package
Programming software package
Programming software package
Programming software package
Programming software package
Programming software package
(b) It can be accessed to 8 network points by setting the routing parameter in
the "Network".
(c) Because routing cannot access, it can access only the connected network.
The connected network can be selected by specifying the I/O No. of the
module.
Personal
computer
USB/ RS-232
RS-232
Q173D C24 MNET
CPU or
Ether
Network No.4
Q173D C24 MNET
CPU or
Ether
Q173D MNET QnUD(H)
CPU or CPU
Ether
: Communication is possible
: Communication is possible (Setting of the routing parameter is necessary.)
: Communication is impossible
Network communications
CPU (C24) Network
CPU (C24) Link
Network Link
Link Network
CPU (C24) Network
CPU (C24) Link
Network Link
Link Network
Personal computer
MNET board or Ether
Network No.1
QnUD(H) Q173D MNET C24
CPU CPU or
Ether
RS-422/485
QnUD(H) Q173D MNET CC-Link CC-Link
CPU CPU or
Ether
RS-422/485
Q173D CC-Link QnUD(H)
CPU CPU
4 - 31
Link CPU
Network CPU
CPU
CPU
Link Network
Network Link CPU
Network CPU
Link CPU
: Usable
C24 : Serial communication module
MNET : MELSECNET/10(H)
Ether : Ethernet
QnUD(H) Q173D MNET
CPU CPU or
Ether
Network No.3
QnUD(H) Q173D
CPU CPU
RS-422/485
Network No.5
Q173D CC-Link MNET QnUD(H)
CPU or CPU
Ether
Usable/
unusable
CPU
: Unusable
MNET
or
Ether
Network
No.2
MNET MNET
or or
Ether Ether
Q173D MNET
CPU or
Ether