Rom Operation Function; Specifications Of 7-Segment Led/Switches - Mitsubishi Electric MOTION CONTROLLERS Q172DCPU Programming Manual

4 AUXILIARY AND APPLIED FUNCTIONS

4.4 ROM Operation Function

4.4.1 Specifications of 7-segment LED/Switches

Q172DCPU
0 0
2)
1
8 8
STOP RUN
EMI
This function is used to operate based on the data in the FLASH ROM built-in Motion
CPU module that the user programs and parameters have been stored.
No.
1)
1)
2)
SW
3)
2
3)
CAUTION
FRONT
BAT
(1) Operation mode
"Operation mode" of the Motion CPU is set by the rotary switch setting of Motion
CPU module at the power supply ON of the Multiple CPU system.
The rotary switch setting, operation mode and operation mode overview are
shown below.
(a) Rotary switch setting and operation mode
SW1
A
0
0
Any setting
(Note-1) : Do not set except the above setting.
(Note-2) : The programs, parameters, absolute position data, and latch data in the
SRAM built-in Motion CPU module are cleared.
Items
7-segment LED
Rotary switch 1 (SW1)
Rotary switch 2 (SW2)
(Note-1)
Rotary switch setting
SW2
Any setting (Except C)
C
4 - 12
Functions
• Indicate the operation state and error information.
• Set the operation mode (Normal mode, Installation
mode and mode operated by ROM, etc.)
• Each switch setting is 0 to F.
Operation mode
Installation mode
0 Mode operated by RAM
6 Mode operated by ROM
SRAM clear
(Note-2)