Esc [F2] [05] [02] [N1] [N2] Position Stamp Feed - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.26

ESC [F2] [05] [02] [n1] [n2] Position Stamp Feed

[Name] Position Stamp Feed
[Function] This command feeds paper in the forward direction to an offset relative to the last
Position Stamp Set position.
[Code]
16
[1B]
10
[27]
[Description]
1. The command "ESC [F2] [05] [02] [n1] [n2]" feeds paper in the forward direction to an offset
relative to the last Position Stamp Set position.
2. Parameters [n1] and [n2] specify a target position in millimeters from the last Position Stamp Set
location. Together they form a 16-bit, unsigned integer with a valid range up to 65,535.
Parameter [n1] is the MSB and parameter [n2] is the LSB of this number.
10
3. The conditions [0] ≤ [n1] ≤ [255]
4. Buffered print data will be printed before the printer processes this command.
5. The Position Stamp Feed command will have no effect when the requested position has already
been passed.
6. By using the "Position Stamp Set" command at the start of a printout and the "Position Stamp
Feed" command at the end of the printout, an application is able to insure a minimum printout
length.
Part No. D 684 112
16 16
+ [F2] + [05] + [02]
10 10
+ [242] + [5] + [2]
10 10
and [0] ≤ [n2] ≤ [255]
Mod.Nr. 4 150813 LEV
16
+ [n1] + [n2]
10
+ [n1] + [n2]
10
must be satisfied.
Page 37 of 95