Esc [F0]+[0C]+[00] End Block Rotation - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.33 ESC [F0]+[0C]+[00]
[Name] End block rotation
[Function] This command closes the Start Block Rotation command and immediately causes
printing of the data sent after the Start Block Rotation command was received.
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC [F0]+[0C]+[00]" command ends the transmission of data to be printed as a block that
was initiated by the Start Block Rotation command and causes it to be printed.
Part No. D 684 112
16 16
+ [F0] + [0C] +
10 10
+ [240] + [12] +
Mod.Nr. 4 150813 LEV
End block rotation
16
[00]
10
[00]
Page 44 of 95