Esc [F0]+[20]+[05]+[W1]+ Create Bitmap [W2] +[H1] +[H1] +[A] - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.49 ESC [F0]+[20]+[05]+[w1]+
[w2] +[h1] +[h1] +[a]
[Name] Create bitmap
[Function] This command is used to initiate the printing of a bitmap and to define its size.
16
[Code] [1B]
10
[27]
[Description]
1. Command "ESC [F0]+[20]+[05]+[w1]+[w2]+[h1]+[h2]+[a]" is used to initiate bitmap printing and
will create a white bitmap with the specified width and height.
2. The bitmap content is defined by one or more consecutive "bitmap body data" commands.
3. Parameters [w1], [w2] define the width of the bitmap in pixels as follows:
"bitmap width" = [w1] * [256]
4. Parameters [h1], [h2] define the height of the bitmap in pixels as follows:
"bitmap height" = [h1] * [256]
5. Parameter [a] defines the attributes for printing the bitmap. The following figure shows the
possible values of parameter [a]:
Parameter [a], bit
(LSB)
b1 – b0
b7 – b2
(MSB)
Part No. D 684 112
16 16 16
+ [F0] + [20] + [05]
10 10 10
+ [240] + [32] + [05]
10
+ [w2]
10
+ [h2]
Value Printing mode
2
[00] No magnification
2
[01] Double width
2
[10] Double height
2
[11] Double width and double height
Reserved for future use; must be set to "0"
Mod.Nr. 4 150813 LEV
Create bitmap
+ [w1] + [w2] + [h1] + [h2] + [a]
+ [w1] + [w2] + [h1] + [h2] + [a]
Page 68 of 95