Esc ! +[N] Character Size Specification - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.7 ESC ! +[n]
[Name] Character size specification
[Function] This command specifies character size for text output.
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC !+[n]" command specifies character size.
2. The following figure shows the relationship between the bits of parameter [n] and character size:
Parameter [n], bit
b0 (LSB)
b1
b2
b3
b4
b5
b6
b7 (MSB)
3. When one line contains different-height character typefaces, the character typefaces are
arranged so that their bottom ends are aligned at the same level.
Part No. D 684 112
Character size specification
16
+ [21] + [n]
10
+ [33] + [n]
Value Printing mode
2
[00] 08x16-dot character typeface
2
[01] 12x24-dot character typeface
2
[10] 16x32-dot character typeface
2
[11] 20x40-dot character typeface
2
[00] No magnification
2
[01] 2 X magnification
2
[10] 3 X magnification
2
[11] 4 X magnification
0 Double height disabled
1 Double height enabled
0 Double width disabled
1 Double width enabled
Reserved for future use; must be set to "0"
Mod.Nr. 4 150813 LEV Page 15 of 95