Esc 3 +[N] Line Pitch Setting - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.10 ESC 3 +[n]
[Name] Line pitch setting
[Function] This command sets the single line pitch in dot lines.
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC 3+[n]" command sets the single line pitch to n dot lines.
2. Please note that "line pitch" is defined as the distance from the top of one character line to the top
of the next character line.
3. This command invalidates the line pitch previously set with the "ESC 2" command.
4. This command invalidates the line spacing previously set with the "ESC A+[n]" command.
5. Parameter [n] defines the line pitch in dot lines.
6. Parameter [n] must match following conditions:
10
[0] <= [n] <=[255]
7. When a line feed is executed and there is printing on that character line, paper is fed by at least
the height of the character currently specified. When a line feed is executed without printing on
the character line, paper is fed only by the specified line spacing. For example, when line spacing
of 10 dot lines is specified for a character whose height is 24 dot lines, paper is fed by 24 dot
lines (if there are characters on the line) or 10 dot lines (if there are no characters on the line).
Part No. D 684 112
16
+ [33] + [n]
10
+ [51] + [n]
10
Mod.Nr. 4 150813 LEV
Line pitch setting
Page 18 of 95