Esc [F0]+[08]+[01]+[N] Bar Code Text Subtitle Setting - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.41 ESC [F0]+[08]+[01]+[n]
[Name] Bar code text subtitle setting
[Function] This command allows enabling or disabling of the bar code text subtitle
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC [F0]+[08]+[01]+[n]" command enables/disables bar code text subtitling and specifies it's
appearance.
2. Parameter [n] specifies bar code text subtitling enabled/disabled, font size 8x16/12x24 and font
source primary/secondary character set.
3. Parameter [n] has following bit map:
Bit Status
0 Bar Code Plain Text Subtitle
1-2 Font size
3 Font source
4-7 Reserved
4. Bar code text subtitling is disabled by default.
5. The bar code text subtitling may be unreadable or incorrect if the bar code dimension exceeds
the paper width.
6. Since the internal primary or secondary font is used for bar code text subtitling, a replacement of
the default fonts might result in an incorrect subtitling.
Part No. D 684 112
16 16
+ [F0] + [08] + [01]
10 10
+ [240] + [08] + [01]
Subtitle Fonts
Size Primary Font
[01]
8x16
[03]
12x24
[05]
16x32
[07]
20x40
Mod.Nr. 4 150813 LEV
Bar code text subtitle setting
16
+ [n]
10
+ [n]
Secondary Font
16 16
[09]
16 16
[0B]
16 16
[0D]
16 16
[0F]
Caption
0: Disabled
00: 08x16, 01: 12x24, 10: 16x32, 11: 20x40
0: Primary
0 (these values should always be set to "0")
1: Enabled
1: Secondary
Page 54 of 95