Esc Sp+[N] Character Spacing Specification - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.13 ESC SP+[n]
[Name]
[Function]
[Code]
[Description]
1. The "ESC SP+[n]" command specifies the spacing between characters in dots.
2. Parameter [n] specifies the number of blank dots between adjacent characters.
3. Condition [0]
4. Initially the value for [n] is [0]
Part No. D 684 112
Character spacing specification
This command specifies the character spacing in dots.
16 16
[1B] + [20] + [n]
10 10
[27] + [32] + [n]
10 10
≤ [n] ≤ [32] must be satisfied.
10
(no character spacing).
Mod.Nr. 4 150813 LEV
Character spacing specification
Page 21 of 95