®
eXtendo
Emulation Command Set Reference
2.1.24
ESC d+[n]
[Name]
Forward n-line feed
[Function]
This command prints the data and feeds a line, then feeds the paper by [n]
character lines.
16
[Code]
[1B]
10
[27]
[Description]
1.
The "ESC d+[n]" command feeds paper by a character line count specified with parameter [n].
10
2.
Condition [0]
≤ [n] ≤ [255]
3.
After [n] lines are fed, the next print position is located at the left edge on the line.
4.
When there is data in the print buffer, the data contained in the buffer is printed upon receipt of
this command, after which paper is fed by [n] character lines.
5.
Pitch or spacing is also taken into account by this command.
Part No. D 684 112
16
+ [64]
+ [n]
10
+ [100]
+ [n]
10
must be satisfied.
Mod.Nr. 4 150813 LEV
Forward n-line feed
Page 35 of 95