Esc [F2] [09] [01] [N] Paper Eject - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.28 ESC [F2] [09] [01] [n]
[Name] Paper Eject
[Function] This command ejects the paper from the printer, either forward or rearward.
[Code]
16
[1B]
10
[27]
[Description]
1. The command "ESC [F2] [09] [01] [n]" causes paper to advance or reverse until the paper is
ejected from the printer. This command is most commonly used when printing precut tickets to
eject the finished ticket.
2. Parameter [n] determines if the paper will be ejected from the front or the rear of the printer. A
10
value of [1] will cause the paper to be ejected from the front, while any other value in the range
10 10
[0] ≤ [n] ≤ [255] will cause the paper to be ejected from the rear.
3. Attempting to eject the paper forward with roll paper will, after approximately 1.5 meters, cause
the paper to reverse until it reaches the printer and will then cause the printer to enter an error
condition.
Part No. D 684 112
16 16
+ [F2] + [09] + [01]
10 10
+ [242] + [9] + [1]
Mod.Nr. 4 150813 LEV
Paper Eject
16
+ [n]
10
+ [n]
Page 39 of 95