Safety Precautions - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
Please read and understand these specifications thoroughly before using the eXtendo
•
We recommend that you save this document in a place where it may be easily consulted when the
printer is used.
Please do not modify or service this printer as this may cause unpredictable faults to occur.
•
This product is not intended to be installed as a critical component in devices or applications which
•
require extremely high reliability or which involve risk to human life, such as life-support medical
equipment, undersea relays, aerospace applications or nuclear power control. If you are
considering such applications, please consult our customer service department.
As with every product, there is a possibility of component failure. Every effort has been made to
•
insure optimal product quality, but the possibility of such failures cannot be completely eliminated.
Please consider such failures when designing this printer into your application.
Take care to verify that this document is intended for use with the firmware of your specific
•
®
eXtendo printer by confirming firmware revision levels between the printer and this document.
This manual is intended to be a supplement to the product operating manual. Any approval or order
based solely upon this manual will not be accepted by HENGSTLER. Any approval must be made
based upon testing and verification of samples of the product in the customer's application.
Part No. D 684 112

Safety Precautions

Mod.Nr. 4 150813 LEV
®
printer.
Page 4 of 95