Esc % +[N] Character Set Selection - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.6 ESC % +[n]
[Name] Character set selection
[Function] This command selects the primary or secondary character set.
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC %+[n]" command selects the primary or secondary character set. Either character set
can be changed by uploading a new character set to the printer using the supplied font upload
tool.
2. If parameter [n] is [0]
3. If parameter [n] is [1]
4. The type of primary/secondary character set (e.g. 8x16, 12x24, 16x32, 20x40) required is
selected with the print mode command (see "ESC ! + ...").
Printing mode specification
(command "ESC ! + ..", lower 4 bits)
08 x 16
12 x 24
16 x 32
20 x 40
Part No. D 684 112
Character set selection
16
+ [25] + [n]
10
+ [37] + [n]
10
, then the primary character set is selected.
10
, then the secondary character set is selected..
Mod.Nr. 4 150813 LEV
Primary
character set
08 x 16
12 x 24
16 x 32
20 x 40
Secondary
character set
08 x 16
12 x 24
16 x 32
20 x 40
Page 14 of 95