Esc 'E'+[N] Bold Characters Enable/Disable - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.15 ESC 'E'+[n]
[Name] Bold characters enable/disable
[Function] This command enables/disables bold character printing
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC 'E'+[n]" command enables or disables bold character printing.
2. Bold characters are enabled when parameter [n] = [1]
10
3. Condition [0] ≤ [n] ≤ [1]
4. The default value for [n] is [0]
Part No. D 684 112
16
+ [45] + [n]
10
+ [69] + [n]
10
must be satisfied.
10
(bold characters disabled).
Mod.Nr. 4 150813 LEV
Bold characters enable/disable
10
, and disabled otherwise.
Page 23 of 95