Esc [F2]+[0A]+[02]+[N]+[M] Unload Paper - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.60 ESC [F2]+[0A]+[02]+[n]+[m]
[Name] Unload Paper command
[Function] This command causes the paper in an X-56 Feed printer to be backed out from
under the thermal printhead and held by an auxiliary roller set.
16
[Code] [1B]
10
[27]
[Description]
1. NOTE: This command is used only by the X-56 Feed family of printers and is ignored on all
other versions.
2. The "ESC [F2]+[0A]+[02]+[n]+[m]" command is used to cause the paper back out from under the
thermal printhead and be held by an auxiliary roller set.
3. The value "[n]" sets the Unload speed in mm/sec, and has a range of [0]
value may vary, an initial value of [12]
4. The value "[m]" sets the Unload distance in mm, and has a range of [0]
value may vary based on the specific mechanical design, an initial value of [06]
recommended.
5. The "Reload Paper" command "ESC [F2]+[0B]+[01]+[n] is used to return the paper to under the
thermal printhead so that the printer is ready to print.
Part No. D 684 112
16 16
+ [F2] + [0A] + [02]
10 10
+ [242] + [10] + [02]
16
is recommended.
Mod.Nr. 4 150813 LEV
Unload Paper
16
+ [n] + [m]
10
+ [n] + [m]
16
to [FF]
16
to [FF]
16
. While this
16
. While this
16
is
Page 80 of 95